Sealer Bundle

100.00

STONTEX SLATE SEALER (1L)

Overview
This is a specially formulated acrylic coating for stone fireplaces hearths and old slate floors. It is a hard wearing treatment ideal for creating a gloss finish on slate.

Where to Use
Use internally only, mainly on fireplace hearths but can be used on old slate floors to make them easier to maintain and clean.

Free shipping on all orders over €75

 

STONTEX INDIAN SANDSTONE SEALER (5L)

Overview
Indian Sandstone Sealer is a water based acrylic treatment which is semi topical and also breathable so will not trap moisture in the stone. Natural veining in the sandstone will be enhanced while keeping an overall natural matt finish.

Where to Use
Used externally and internally but only suitable for Indian Sandstone paving slabs.

Free shipping on all orders over €75

STONTEX AEROSOL SPRAY SEALER (600ml)

Overview
This is the ideal sealer for small areas sealing grout lines mainly. Easy spray-on application. One coat.  Can be used by tiler straight after grouting even if the grout is fully cured. Will not yellow or discolour over time like many similar DIY spray sealers.

Where to Use
Used internally mainly on grout line but will work on porous tiles too. Popular in kitchen splash backs and bathrooms.

Free shipping on all orders over €75

Before & After Images

Additional information

STONTEX SLATE SEALER (1L)

Application and Time

Application is normally two coats depending on the porosity of the stone and the desired finish you require. Apply first coat with a normal paint roller.
It should dry within an hour. Once touch dry apply a second coat. Do not walk on the treated area for at least 12 hours until treatment is fully cured.

Equipment

Normal short ply paint roller and tray.

Coverage Rate

4sqm per litre with two coats.

Cautions

Be aware if applied to a slate floor the finish will be slippy.
Do not apply on other stone surfaces as it can discolour.

MSDS Data Sheets

https://mail.google.com/mail/u/0?ui=2&ik=00d44e945d&attid=0.33&permmsgid=msg-f:1728824818217038814&th=17fe050330b4b3de&view=att&disp=inline&realattid=17fe04f7f3480e3017122

STONTEX INDIAN SANDSTONE SEALER (5L)

Application and Time

Apply one good coat either spray or roll. Allow sealer to penetrate into the surface of the stone for 15-20mins, then using a cloth or dry roller, remove any white residue on the surface.

Equipment

Knapsack or hand held Pump Sprayer or Short Ply roller.
Fluffy roller sleeve or absorbent towel to remove any excess product 20mins after application.

Coverage Rate

One good coat at 7sqm per litre coverage rate.

Cautions

Do not allow white residue to sit on the surface of the stone 20mins after application. All sealer should have penetrated into the stone. Any white residue is excess product that needs to be removed.

MSDS Data Sheets

https://mail.google.com/mail/u/0?ui=2&ik=00d44e945d&attid=0.14&permmsgid=msg-f:1728824818217038814&th=17fe050330b4b3de&view=att&disp=inline&realattid=17fe04f7f3393352a2cf

STONTEX AEROSOL SPRAY SEALER (600ml)

Application and Time

One coat spray application. It dries invisible so do not worry if it gets on tiles. Used mainly on grout lines making ongoing maintenance easier.

Equipment

Dry cloth to remove any excess overspray.

Coverage Rate

30 linear meters per 600ml aerosol spray can.

Cautions

Remove any excess residue using a dry absorbent towel. Cover any timber or metal with masking tape.

Reviews

There are no reviews yet.

Be the first to review “Sealer Bundle”

Your email address will not be published. Required fields are marked *

I accept the Privacy Policy