Additional information
STONTEX ALL-IN-ONE OUTDOOR CLEANER (5L)
| Application and Time | Watch this video to see how to apply: |
|---|---|
| Equipment | Plastic bucket to dilute |
| Coverage Rate | Approximately 10sqm using neat, up to 30sqm diluted 1 to 1 with water depending on how badly stained the material is. |
| MSDS Data Sheets | https://drive.google.com/file/d/1-fEZM1AFOsadT3wnF6QQJwriUzlthUlX/view?usp=sharing |
STONTEX RUST OFF
| Application and time | Rust-Off is a ready-to-use heavy-duty rust remover suitable for use on many types of natural stone without causing damage. It is very effective for dissolving problematic rust stains. Causes for these stains may be iron-containing fertilizers, metal garden furniture, leaking heating systems. Repeat application in case of unsatisfactory results. Some stone and coloured concrete may change colour after treatment with Rust-Off. Apply neat – do not dilute, agitate with a stiff nylon brush, allow to dwell on the stone for about 5mins then rinse really well with hose or power washer. Repeat if necessary to remove all iron oxide / rust stains. Application Video: https://www.youtube.com/watch?v=MDgKEhakvx0 |
|---|---|
| Equipment | Stiff nylon brush |
| Cautions | Do not allow to dwell on the stone for longer than 10mins, rinse really well with power washer as the iron / rust has been turned from solid to liquid and is enveloped in the gel hence the purple colour needs to be rinsed thoroughly. |
| MSDS Data Sheets | https://stonedoctors.ie/wp-content/uploads/2020/04/STONTEX-RUST-OFF-msds.pdf |
STONTEX PLATINUM STONE SEALER
| Size | |
|---|---|
| Application and Time | Apply sealer neat DO NOT DILUTE. Use a knapsack or pump sprayer. Apply evenly to a clean and dry surface. After 10-15 mins remove any excess sealer on surface of the material with dry fluffy roller sleeve or absorbent towel. Watch the Application Video here: https://www.youtube.com/watch?v=-gLoHGbl7m8&authuser=0 |
| Equipment | Knapsack Sprayer / Hand Held Pump Sprayer. |
| Coverage Rate | 8-10sqm per litre depending on porosity of the material. |
| Cautions | Ensure that you tape off any areas that you don't intend to seal. During application keep away from children and pets. Once fully cured 24hrs after application it's safe. If you need to walk on the freshly treated surface prior to 24hrs please ensure that the treatment is dry to touch and refrain from heavy traffic until fully cured after 24hrs. |
| MSDS Data Sheets |
Reviews
There are no reviews yet.